what screwdriver do i need to build a pc
Tools You'll Need to Build Your Ain Computer
Yous don't need an expensive toolkit to build your own estimator, but in that location are a few simple electronics tools that yous admittedly must have. All of these tin can exist hands obtained at nearly any computer shop or online.
You may already take some of these tools. If not, and so the easiest style to get the tools you need is to purchase a computer repair tool kit that contains all the tools you lot'll need, equally well as a handy carrying case to keep them organized.
Equally with all tools, y'all should buy the best quality computer tools that you tin can afford. Good tools final longer and make the job easier. All estimator tools should exist not-magnetized.
You will need, at a minimum, the following uncomplicated tools:
Screwdrivers and nut drivers. Yous should have, at a minimum, pocket-sized- and medium-sized Phillips and flat screwdrivers and a 1/4" nut driver. A precision screwdriver set should accept all the screwdrivers you'll need.
Needle-Nosed Pliers or Forceps. Very small needle-nosed pliers, forceps, or tweezers are very handy for removing and inserting jumpers on motherboards and picking upward dropped screws.
Cable Ties. Plastic cable ties are useful for neatly bundling wires and cables away from fans and other components within the computer.
Anti-Static Kit. An anti-static kit consists of a rubberized mat and a wrist strap that attaches to both the mat and the computer or electronic device you lot're working on. This both protects the equipment from static damage and protects your tabletop from scratches. Click here for more information about anti-static precautions.
Estrus Sink Compound. Rut sink compound improves the thermal efficiency of heat sinks and improves cooling. It's sometimes included with processor fans or heat sinks, but may likewise be purchased separately. It is applied neatly to the area where the processor contacts the heat sink to meliorate cooling efficiency. (Some heat sinks have the compound "congenital-in" behind a little peel-off label.) I like Arctic MX-four or other silver-based thermal compounds.
Canned Air or Canless Air Duster. Canned air or a canless air duster air is used to blow dust out of the nooks and crannies of your computer. Never blow into a estimator with your lips to remove dust. Your breath contains likewise much moisture (and perhaps other things depending on what y'all ate for dinner). Also, never use a household vacuum cleaner nozzle to clean inside a computer. They generate way too much static.
Pill Bottle or a Small Container. You'll need a pill bottle or other small container to hold the various screws, jumpers, and other small parts used to assemble and configure a homebuilt computer.
Nice Reckoner Tools to Accept, just Not Strictly Necessary
In addition to the above, if yous plan on making computer-building an ongoing hobby or if you'd like to learn to repair computers, you may want to consider the following tools. They're not necessary for a typical computer-building projection, simply they're nice to have if yous practice this sort of work often or want to pursie the computer-repair trade.
Multimeter. All multimeters measure out voltage and resistance, and many can do much more than. In estimator-related work, they're nigh often used to diagnose ability problems, loose wires, switch problems, and ground faults.
Power Supply Tester. A ability supply tester is a specialized tool that applies a load to all the output voltages of a ability supply to bank check its proper functioning. Information technology'south a must-have for computer-repair technicians, and a "nice-to-accept" for hobbyist computer builders.
Logic Probe. A logic probe is a tool used to check the operation and logical states of binary circuits. Information technology's nigh ofttimes used for differential diagnosis of bug that could be due to various components (for example, is the RAM failing or is the chipset defective). It'south an utterly useless tool unless you lot know enough nearly computer electronics to empathize how to use information technology, and an indispensable one if y'all practice.
Soldering Iron. A precision soldering iron is i of those tools that is rarely used in computer-repair work, but which has no substitute when you practise need one. In reckoner-repair piece of work, they're nearly often used to replace burnt-out capacitors on motherboards as a terminal-ditch effort to avoid having to replace the mobo.
Networking Tools. Every computer technician and network technician needs a networking tool kit to make or test network cables or troubleshoot network flaws. For hobbyists, it's more of a "cool-to-accept" kind of affair.
Hard Drive Duplicator. A difficult drive duplicator duplicates hard drives. Some things merely make sense. They are available for both SATA and NVMe (M.2) drives. Most of them can also be used every bit docks to connect to the drive using USB (and sometimes eSATA). Computer technicians use hard drive duplicators all the time. Hobbyists probably don't need ane unless they're really into the hobby.
Getting Started
- Finding a Place to Work
- Planning Your PC
- Tools (This page)
- Anti-Static Precautions
Source: https://kitchentablecomputers.com/tools.php
0 Response to "what screwdriver do i need to build a pc"
Post a Comment